|
|
Build Your Online Product Catalogs?
| Product Name: |
High power laser tube
|
| Supply Ability: |
50000 pcs |
| Related proudcts |
laser tube, |
| Specifications |
70W,1250mm |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
1 Piece |
| Unit Price: |
|
|
Laser tube specifications
First, the composition of the laser tube
Sealed off CO2 mainly by the hard glass, resonant, electrode composed of three parts.
1. Hard glass parts, the parts from the burning material into the discharge tube GG17, water-cooled units, and set back to the trachea and gas composition. Sealed off CO2 laser tube is usually three-structure is the innermost tube, the middle water net sets, outermost layer is the gas sets, back to the trachea and the gas discharge tube is used for connecting tubes.
2. Cavity part, the part from the total reflector and output mirrors. Resonator mirror generally all-optical glass and silicon (Si) as substrate, the surface crossing the gold film, MMR film, mirror reflection in the vicinity 10.6um 99.8% more than the output of the cavity mirrors can generally use infrared radiation transmission 10.6um material germanium (Ge), zinc selenide (ZnSe) as the substrate, the surface crossing on the multilayer dielectric film made of.
3. Electrode part, CO2 lasers generally use cold cathode, cylindrical shape, cathode material selection for the life of the laser has a great influence on the cathode materials, the basic requirement is that the sputtering rate, the gas absorption rate is small, common metal material is nickel.
Second, how to use co2 laser tube ,
1, the first electrode wire connected, (, -) Do not take the wrong pole.
2 cooling water pipe installation, the installation method for the water from the anode, cathode and meet the next entry on the water out principle, and the interface is not leaking before use to store enough water inside the water, cooling water through the tube must be free air bubbles before use, each use must look if the laser is vertically installed, please note that in the laser tube at the top there is no bubble, bubbles exist in the time to run the lead to thermal shock, will cause the laser tube damage.
3, the laser tube in order to maintain good performance, use between 20-25 degrees Celsius temperature-controlled |
| Company: |
Nantong Bill Laser Devices Co.,LTD
|
| Contact: |
Mr. Angelo Wang |
| Address: |
Communication Technology Building,Wandao Road,Wanjiang area ,1st floor, |
| Postcode: |
523000 |
| Tel: |
+86-0769-26380380 |
| Fax: |
+86-0769-28638056 |
| E-mail: |
|
|
|
|
Home
